Alex Dobrianski casts his shadow in front of a projection of the moon at the H.R. MacMillan Space Centre in Vancouver. (Photo: Darryl Dyck/CP)Alex's laboratory is in his home on one of the upper storeys of a downtown Vancouver highrise. Space-themed posters pepper the walls and pieces of electronics equipment are scattered about the room.
The Dobrianskis' Team Plan B was the only Canadian competitor among 16 groups shortlisted last summer for the competition. That list was reduced Jan. 24 to five teams that secured launch contracts to send their robots into space. The Dobrianskis were not among the finalists, but Sergei said their company is pushing forward with new seed money and support from the Centre for Applied Research and Innovation at the B.C. Institute of Technology. "Through the years we've decided that this is something we're going to focus on with or without the Google Lunar XPRIZE," he said, adding that the competition was invaluable for networking and recruitment.
"Imagine if you could start utilizing those materials to refuel satellites that are now in space."
Alex Dobrianski, left, and his son Sergei Dobrianski talk about their project in Vancouver on January 18. (Photo: Darryl Dyck/CP)Sergei credits his father's passion and commitment for much of the team's success. "Alex has always had a drive to achieve the impossible. Always," his son said, smiling sheepishly. "Any time you tell him something is impossible, he's going to go beet red and he's going to try and prove you wrong. Any time he hears, 'This is not a possibility. You cannot do this.' This actually mobilizes him."
Sergei Dobrianski gives a TedX talk on 3D printing:The team's modest size has meant fewer resources, but has also spurred a need to be innovative and to pivot quickly in response to changing circumstances, Sergei said. While the team has included up to 20 members at various times, at its core is a family affair, which Sergei said has both pros and cons. "Open communication," Sergei said, laughing. "There's always zero filter with what we're doing, which is perfect, which is exactly what you want for any team, for any organization." Alex reached for a black, nine-toothed cog, about four centimetres in diameter with a slightly pockmarked surface. "Made actually inside a vacuum," he said, rotating the cog between his thumb and index finger. "Little bit tough, like you can see, but this will be our first prototype for 3D-printing experiment." Alex estimates it will take five to seven years before 3D printing arrives on the moon, and adds that the journey there still poses many challenges. "You need to be enthusiastic. You need to be realistic. You need to have a little bit of luck," he said. "Enthusiastic. I would say that's the most important."
— Follow @gwomand on Twitter
— Follow @gwomand on Twitter
Also on HuffPost